Loading... Please wait...
  • Image 1
  • Image 2

STI 1000 ft. Metal-Detecting Driveway Alarm

Item #STI34150
Current Stock:
  • Sensor only picks up metal, no false alarms from animals or heat.

  • Easy to set up and install with fantastic manufacturer technical support.

  • Mounts next to driveway, no burying necessary.

  • Gives a visual flashing light when set off and stays lit until reset, no missed alarms.

  • Adjustable sensitivity settings for all kinds of driveways or uses.

More About the Metal-Detecting Driveway Monitor

The Metal-Detecting Wireless Driveway Monitor sends a wireless signal to your home or office to alert you when a vehicle enters your driveway. The receiver chimes and an alert LED flashes red until reset. The driveway sensor uses a patented magnetometer sensor system which detects the movement of any large metallic (iron or steel) object close to the sensor. People, animals and shadows will not trigger the driveway sensor. The sensor can be placed up to 1000 ft.* from the receiver in your home or office.

How it works: Provide power to units and follow instructions for inital set-up. Some assembly is required for sensor. Stake is inserted in the ground within a few feet of the area to be monitored. When a car drives within 12 feet, the metal-detecting sensor will send a signal to the receiver. The receiver lights up and plays assigned tone to notify you that the alarm has been triggered. The light stays on until you turn it off. Please see Features & Specs for more information.

Important: Although line-of-sight is not required, the maximum range is based on optimal conditions with minimal interference. Wireless range is affected by objects such as walls, trees, electronics, etc. Actual range may vary, depending on environment.

  • Sensor Type: Metal-Detecting.
  • Range: Sensor adjustable, up to 12 ft.
    Sensor to receiver maximum 1000 ft.
  • Zones: Program up to 4 different channels; allows you to distinguish which sensor was triggered and prevent interference.
  • Tones: Choose from 4 tones for sensor alert. There are also low battery, tamper, and out-of-range alerts.
  • Lights: Flash on sensor when triggered, continue to flash until reset, low battery alert.
  • Delay: Temporary or permanent silent mode.
  • Weather: Sensor is weather-resistant.
  • Mounting: Receiver can be set on a countertop or mounted on a wall using a nail or strong adhesive. Sensor is mounted on a tube and stake inserted into the ground next to the driveway.
  • Expandability: Can support up to 4 sensors.
  • Compatibility: Can be connected to STI lamp controller accessory.
  • Frequency: 433 MHz.
  • Relay: Receiver has 12 V output jack.
  • Warranty:1 year Manufacturer's Warranty and tech support.
  • Power: Sensor 2 C Alkaline batteries
    Receiver plugs in to outlet.
  • Dimensions: Receiver 4" x 2.5" x 1".
    Sensor 5.5" x 4".
    Stand 12".
    Spike 5.1".
  • Includes: 1 sensor, 1 receiver, 1 12 v adapter, 1 stand and spike.

Find Similar Products by Category

Write your own product review
  1. Excellent product! 5 Star Review

    Posted by on 15th Aug 2016

    Excellent product! Transmits accurately every time.