Wireless Backup Camera w/ MonitorIn today's fast-paced world it is easy to miss another car, item, and even a person while you back out of a parking space or your own driveway. Help eliminate the chance of getting into a parking nightmare with this easy-to-install deluxe backup camera.
The rear-view camera mounts to your rear license plate and sends a wireless video signal to a 3-1/2” color monitor that you position on your dashboard or sun visor up to 50 ft.* away! The camera offers 110 degree horizontal and 80 degree vertical viewing angles for an expanded view. 8 LED infrared lights allow you to see behind you even in the darkest conditions. Works with all 12V DC electrical systems.
30-day money back guarantee!
In stock! Same day shipping!
NO sales tax!
(except WA state)Dealer & Reseller Inquiries: If you are interested in reselling our products,
Click Here for instructions.
Wireless Backup Camera Features
Simple do-it-yourself installation- Sets up in minutes! Simple step-by-step directions included. Toll-free technical support available throughout the USA and Canada.
Wireless backup camera system with color LCD monitor allows you to see what is behind you before backing up.
Camera mounts to your existing license plate holder and provides 110 degrees of horizontal camera viewing and 80 degrees vertical camera viewing.
3.5" color monitor easily mounts to your dash or visor.
Wireless remote controls monitor so you do not have to reach to turn it on.
Compatible with any 12V DC electrical system. The monitor plugs directly into your car lighter or easily wires to your fuse box. The wireless camera easily connects to your existing backup lights.
Camera will turn on automatically as soon as you shift into reverse.
USB port on monitor can be used to charge USB devices, such as MP3 players and GPS systems.
Up to 50 ft.* wireless signal from the camera to the monitor eliminates the need for running wires.
Great for cars, trucks, trailers, SUV's, RV's and delivery vehicles.
Utilizes 2.4 GHz Technology.
What’s Included:
Back-up camera
3.5" TFT LCD monitor
Wireless remote
Monitor mounting stand
Monitor power cable with 12 volt adaptor
Monitor power cable with 12V+, 12V-, and remote wire
License plate screws, bolts & nuts
In-line wire connectors
Installation & operation guide
* Although line of site is not required, the maximum range is based on optimal conditions with minimal interference. Wireless range is affected by objects such as walls, trees, etc. Actual range may vary, depending on environment.
Average rating is 4.8
By: Ron Schaffer
Deer Trail ColoradoI am using it on the back of a towed camper with the camera on the right side and the monitor in the Pick/Up works GREAT.......Thanks
0.3By: Gary O'Connor
Averill Park, NYHad it professionally installed. Works well, very satisfied.
0.3By: jim sowers
Georgetown,OhioThe back-up camera is great,no problem hooking up boat now.
0.3 These instructions do not apply to all vehicles. They are only meant as a general guide due to the number of different makes & models. For vehicle specific questions contact your vehicle’s manufacturer.
MONITOR INSTALLATION
Choose a Location and Power Cable
Temporarily place the monitor stand in the location that you have chosen.
If you are using the supplied Monitor Wiring Harness, route the power cable to the vehicle’s fuse box. If you are using the 12V adapter, route the power cable to the vehicle’s cigarette lighter socket/12V power outlet. The cable must not interfere with the safe operation of the vehicle.
Mounting the Monitor Stand
Before permanently mounting the monitor, clean the mounting area well with isopropyl alcohol, then dry thoroughly.
With the two pieces of the oval hook & loop fastener attached to each other, peel the backing paper from “loop” side of the oval shaped hook & loop fastener.
Next, align the hook & loop fastener with the bottom of the monitor stand and press firmly to adhere.
With the “hook” half of the hook & loop fastener attached to the “loop” half you just attached to
the monitor, peel off the backing paper.
Then press the monitor stand firmly onto the area you just cleaned. Adhesive reaches maximum strength in 24 hours. Moving the fastener from its original position will weaken the adhesive and may damage the mounting surface.
Air Vent Clip
Insert the square end of the vent clip into the slot on the back of the monitor. Slide the clip upwards until secure. You are now ready to attach the monitor to an air vent.
Insert the fingers of the vent clip into the vehicle’s air vent clip until it’s secure.
Power Cable with 12 Volt Cigarette Lighter Adapter
Insert the small 12 Volt DC plug of the power cable into the left side of the monitor.
Plug the 12 Volt cigarette lighter adapter into the vehicle’s cigarette lighter socket.
Press the ON/OFF button to turn the monitor ON.
Hard-Wired to the Fuse Box
Disconnect the negative battery cable from the vehicle’s negative battery terminal.
Connect the Red wire to the 12 Volt +/ACC terminal in the vehicle’s fuse box. See vehicle’s owner’s manual for fuse box diagram.
The ground cable must be located on an area of metal on the vehicle’s body/firewall that does not have any vehicle components behind it. Sand off any paint to reveal bare metal, this area will be your chassis ground.
Drill a pilot hole for the supplied self-tapping sheet metal screw. Make sure there are no vehicle components behind where you are drilling the hole.
Strip the insulation from the end of the black wire 1.3 cm and wrap the wire around the self-tapping sheet metal screw before tightening.
Re-connect the negative battery cable.
Plug the power cord into the monitor; use the ON/OFF button to turn the monitor ON & OFF.
CAMERA INSTALLATION
You may mount the camera using the license plate’s top or bottom mounting bolts or screws. The Camera’s field of view shall not obstructed in any way.
Loosen the license plate bolts/screws, then remove the rear license plate.
Insert the license plate bolts or screws through the bolt holes of the camera, then through the license plate.
Align the license plate and bolts or screws with the license plate mounting holes on vehicle, and then tighten the license plate bolts or screws.
Adjust the angle of the camera by tilting the camera housing as shown in. Check the image on the monitor, and then adjust the camera if needed.
Next you will need to choose a route for the camera’s power cable through the vehicle’s body to the reverse light circuit (see your vehicles owners’ manual) and connect the leads using the SCOTCH-LOK connector clips.
Wireless Backup Camera w/ Monitor
close